|
|
Flash is a device used to store data that has a flash memory device an integrated USB connector. Flash
serves as a data storage medium that has a physical form that is small
and light and has a large capacity that makes many users choose this
tool as a data storage medium that effective and efficient as it can be
brought anywhere.
But
sometimes we flash can not be read at all by a PC / Laptop which is
usually caused by damage to hardware or other devices by the act of our
own.
Some causes are not unreadable flash on your computer / PC or laptop we were able to hit the water, the BIOS settings on a Windows-troubled, damaged USBnya port, and several other causes. For the following will describe how to fix unreadable flash before you decide to replace it with the new flash.
Here we shall see further on how to fix unreadable flash:
1. First of all, check the health of the flash on a laptop or other computer to make sure that your flash really can not be read on any computer device that will not be any improvement.
2. If your flash is read on another computer, meaning there is a system error that occurs on your computer previously. To fix this, you simply plug it in a computer that can not read your flash them and then restart your computer to allow system fresh again. If it still does not read well, go to the menu and then type decmgmt.msc RUN and press enter, then a new window will appear. Look for writing USB controller hardware and find the yellow icon with an exclamation point. The harware uninstall then restart your computer.
3. You can format your flash by using special software to fix the flash.
4. Perform programming flash back tidka Controller IC can read it by using software tools alcorM_UFD.
How to Fix such a grouch Not It reads above, good luck practicing at home. Hopefully this article can help, thank you.
Some causes are not unreadable flash on your computer / PC or laptop we were able to hit the water, the BIOS settings on a Windows-troubled, damaged USBnya port, and several other causes. For the following will describe how to fix unreadable flash before you decide to replace it with the new flash.
Here we shall see further on how to fix unreadable flash:
1. First of all, check the health of the flash on a laptop or other computer to make sure that your flash really can not be read on any computer device that will not be any improvement.
2. If your flash is read on another computer, meaning there is a system error that occurs on your computer previously. To fix this, you simply plug it in a computer that can not read your flash them and then restart your computer to allow system fresh again. If it still does not read well, go to the menu and then type decmgmt.msc RUN and press enter, then a new window will appear. Look for writing USB controller hardware and find the yellow icon with an exclamation point. The harware uninstall then restart your computer.
3. You can format your flash by using special software to fix the flash.
4. Perform programming flash back tidka Controller IC can read it by using software tools alcorM_UFD.
How to Fix such a grouch Not It reads above, good luck practicing at home. Hopefully this article can help, thank you.
Author: Unknown Location: Pangkalpinang, Bangka Belitung
Article Tips and Tricks to Fix No flash It reads, Published by Unknown on the day Wednesday, July 3, 2013. Hopefully this article can add your insights. Unknown a
is a writer who wants to be successful in the virtual world. Try, and keep trying. May God give consent. regards
0 comments:
Post a Comment